Model NO.: WSP-PLP
Modulation System: PWM
In-Out: Lifting Pressure Type
Power Supply Voltage: 1.5-36V
Pack Sealing Size: SC-70
Brand: OEM
Dimming Function: Built-in 3 in 1 Dimming Function(1-10VDC,PWM Signa
Trademark: OEM
Specification: CE, CB
Origin: Shenzhen, Guangdong, China
HS Code: 8504401400
Model NO.: WSP-PLP
Modulation System: PWM
In-Out: Lifting Pressure Type
Power Supply Voltage: 1.5-36V
Pack Sealing Size: SC-70
Brand: OEM
Dimming Function: Built-in 3 in 1 Dimming Function(1-10VDC,PWM Signa
Trademark: OEM
Specification: CE, CB
Origin: Shenzhen, Guangdong, China
HS Code: 8504401400
PLP Series: 20-60WÂ Â power supply with PFC function*Universal AC input/full range
*Built-in active power factor correction function
*Natural cooling
*Built-in 3 in 1 dimming function(1-10VDC,PWM signal or resistance)
*Class 2 isolation, no F.G(PLP-20)
*Protection function: short circuit,over current,over voltage,over temperature(only PLP-20)
*Built-in current limiting circuit
*Class 2 power supply, by LPS(limited power source)test
*Used in the LED lighting system
*2 years warranty
| Series No. | Model No. | Specification | |||||||||||||
| AC input range | AC inrush Current(Max.) | Current adjustable range | Over current protection | Start,rise,holding time | Withstand Voltage | Working Temperature | EMC standards | Connector | Output | Voltage tolerance | Ripple&noise | Efficiency | Size(mm) | ||
| PLP-20 | PLP-20-12 | 90~277VAC; 127~392VDC |
Cold start, 25A/230VAC |
75%~100% | 95%~110% Rated current limit,, Automatic recovery | 2300ms,200mss(230VAC Full load),no hold time | I/P-O/P:3.75KVAC, | -30ºC~+60ºC | EN55015,EN61000-3-2Class C,EN61000-3-3,EN61000-4-2,3,4,5,6,8,11,EN61547 | UI1015 18AWGX2C(30cm) | 12V, 0~1.6A | ±10% | 2.5V | 80.0% | 140x32x22 |
| PLP-20-18 | 18V, 0~1.1A | ±10% | 3.0V | 81.0% | |||||||||||
| PLP-20-24 | 24V, 0~0.8A | ±10% | 3.0V | 82.0% | |||||||||||
| PLP-20-36 | 36V, 0~0.55A | ±10% | 3.0V | 83.0% | |||||||||||
| PLP-20-48 | 48V, 0~0.42A | ±10% | 3.8V | 83.5% | |||||||||||
| PLP-30 | PLP-30-12 | 90~264VAC; 127~370VDC |
Cold start, 25A/230VAC |
75%~100% | 100%~110% Rated current limit,, Automatic recovery | 1200ms(230VAC Full load),no hold time | I/P-O/P:3.75KVAC, I/P-FG:2KVAC,O/P-FG:0.5KVAC | -30ºC~+70ºC | EN55015,EN61000-3-2Class C,EN61000-4-2,3,4,5,6,8,11,EN61547 | 3+2P/3.96mm pitch,JST P/N:B3P/B2P-VH | 12V, 0~2.5A | ±10% | 2.0V | 83.0% | 101.6x50.8x26.6 |
| PLP-30-24 | 24V, 0~1.3A | ±10% | 2.4V | 85.5% | |||||||||||
| PLP-30-48 | 48V, 0~0.63A | ±10% | 4.8V | 86.5% | |||||||||||
| PLP-45 | PLP-45-12 | 90~264VAC; 127~370VDC |
Cold start, 30A/230VAC |
75%~100% | 100%~110% Rated current limit,, Automatic recovery | 1000ms(230VAC Full load),no hold time | I/P-O/P:3.7KVAC, I/P-FG:2KVAC,O/P-FG:0.5KVAC | -30ºC~+70ºC | EN55015,EN61000-3-2Class C,EN61000-4-2,3,4,5,6,8,11,EN61547 | 3+2P/3.96mm pitch,JST P/N:B3P/B2P-VH | 12V, 0~3.8A | ±10% | 4.2V | 86.0% | 101.6x50.8x26.6 |
| PLP-45-24 | 24V, 0~1.9A | ±10% | 3.8V | 89.0% | |||||||||||
| PLP-45-48 | 48V, 0~0.95A | ±10% | 4.8V | 89.0% | |||||||||||
| PLP-60 | PLP-60-12 | 90~264VAC; 127~370VDC |
Cold start, 35A/230VAC |
75%~100% | 100%~110% Rated current limit,, Automatic recovery | 1000ms(230VAC Full load),no hold time | I/P-O/P:3.7KVAC, I/P-FG:2KVAC,O/P-FG:0.5KVAC | -30ºC~+70ºC | EN55015,EN61000-3-2Class C,EN61000-4-2,3,4,5,6,8,11,EN61547 | 3+2P/3.96mm pitch,JST P/N:B3P/B2P-VH | 12V, 0~5.0A | ±10% | 4.5V | 84.0% | 101.6x50.8x26.6 |
| PLP-60-24 | 24V, 0~2.5A | ±10% | 4.5V | 88.0% | |||||||||||
| PLP-60-48 | 48V, 0~1.3A | ±10% | 4.8V | 89.0% | |||||||||||
PLP Series: 20-60WÂ Â power supply with PFC function
*Universal AC input/full range
*Built-in active power factor correction function
*Natural cooling
*Built-in 3 in 1 dimming function(1-10VDC,PWM signal or resistance)
*Class 2 isolation, no F.G(PLP-20)
*Protection function: short circuit,over current,over voltage,over temperature(only PLP-20)
*Built-in current limiting circuit
*Class 2 power supply, by LPS(limited power source)test
*Used in the LED lighting system
*2 years warranty
| Series No. | Model No. | Specification | |||||||||||||
| AC input range | AC inrush Current(Max.) | Current adjustable range | Over current protection | Start,rise,holding time | Withstand Voltage | Working Temperature | EMC standards | Connector | Output | Voltage tolerance | Ripple&noise | Efficiency | Size(mm) | ||
| PLP-20 | PLP-20-12 | 90~277VAC; 127~392VDC |
Cold start, 25A/230VAC |
75%~100% | 95%~110% Rated current limit,, Automatic recovery | 2300ms,200mss(230VAC Full load),no hold time | I/P-O/P:3.75KVAC, | -30ºC~+60ºC | EN55015,EN61000-3-2Class C,EN61000-3-3,EN61000-4-2,3,4,5,6,8,11,EN61547 | UI1015 18AWGX2C(30cm) | 12V, 0~1.6A | ±10% | 2.5V | 80.0% | 140x32x22 |
| PLP-20-18 | 18V, 0~1.1A | ±10% | 3.0V | 81.0% | |||||||||||
| PLP-20-24 | 24V, 0~0.8A | ±10% | 3.0V | 82.0% | |||||||||||
| PLP-20-36 | 36V, 0~0.55A | ±10% | 3.0V | 83.0% | |||||||||||
| PLP-20-48 | 48V, 0~0.42A | ±10% | 3.8V | 83.5% | |||||||||||
| PLP-30 | PLP-30-12 | 90~264VAC; 127~370VDC |
Cold start, 25A/230VAC |
75%~100% | 100%~110% Rated current limit,, Automatic recovery | 1200ms(230VAC Full load),no hold time | I/P-O/P:3.75KVAC, I/P-FG:2KVAC,O/P-FG:0.5KVAC | -30ºC~+70ºC | EN55015,EN61000-3-2Class C,EN61000-4-2,3,4,5,6,8,11,EN61547 | 3+2P/3.96mm pitch,JST P/N:B3P/B2P-VH | 12V, 0~2.5A | ±10% | 2.0V | 83.0% | 101.6x50.8x26.6 |
| PLP-30-24 | 24V, 0~1.3A | ±10% | 2.4V | 85.5% | |||||||||||
| PLP-30-48 | 48V, 0~0.63A | ±10% | 4.8V | 86.5% | |||||||||||
| PLP-45 | PLP-45-12 | 90~264VAC; 127~370VDC |
Cold start, 30A/230VAC |
75%~100% | 100%~110% Rated current limit,, Automatic recovery | 1000ms(230VAC Full load),no hold time | I/P-O/P:3.7KVAC, I/P-FG:2KVAC,O/P-FG:0.5KVAC | -30ºC~+70ºC | EN55015,EN61000-3-2Class C,EN61000-4-2,3,4,5,6,8,11,EN61547 | 3+2P/3.96mm pitch,JST P/N:B3P/B2P-VH | 12V, 0~3.8A | ±10% | 4.2V | 86.0% | 101.6x50.8x26.6 |
| PLP-45-24 | 24V, 0~1.9A | ±10% | 3.8V | 89.0% | |||||||||||
| PLP-45-48 | 48V, 0~0.95A | ±10% | 4.8V | 89.0% | |||||||||||
| PLP-60 | PLP-60-12 | 90~264VAC; 127~370VDC |
Cold start, 35A/230VAC |
75%~100% | 100%~110% Rated current limit,, Automatic recovery | 1000ms(230VAC Full load),no hold time | I/P-O/P:3.7KVAC, I/P-FG:2KVAC,O/P-FG:0.5KVAC | -30ºC~+70ºC | EN55015,EN61000-3-2Class C,EN61000-4-2,3,4,5,6,8,11,EN61547 | 3+2P/3.96mm pitch,JST P/N:B3P/B2P-VH | 12V, 0~5.0A | ±10% | 4.5V | 84.0% | 101.6x50.8x26.6 |
| PLP-60-24 | 24V, 0~2.5A | ±10% | 4.5V | 88.0% | |||||||||||
| PLP-60-48 | 48V, 0~1.3A | ±10% | 4.8V | 89.0% | |||||||||||
Owing to our expertise and with the help of our experienced professionals, we are offering our clients. Recessed Down Light. This light is extensively used in high rising buildings across the world. High in demand for its features like superior illumination, perfect finish and durability, this light is available in a variety of colors, designs and patterns. Designed in accordance with international standards using premium quality raw materials, we offer this down light at very affordable rates to the clients.
High Power LED ALR Lamp, High Power Bean Lamp, LED Bean Container Light
Dearhe Optoelectronics Techco.Factory in Shenzhen,China , http://www.dearheledfactory.com