Solid Enameled Annealed Electric Bare Copper Clad Steel Aluminium Wire

 Enameled wire
 General introduction
 
Enameled wire is mainly composed of conductor and insulation layer. The main production process includes annealing the conductor and enameling several time on the surface to get relatively thin insulation but high break-down voltage. In recent years, with the rapid development of electrical and electronic products, enameled wire has been applied to various fields of production and life, such as various types of motors, transformers, rectifiers, voice coil, electromagnetic inductance coil.

 Classification of enamel wire

 Classification by conductor
A  enameled copper wire
 
Advantages: as the most traditional type of enameled wire, the application field is wide, soldering convenient, performance stable.
Disadvantages: high cost of production.
 
B Enameled copper clad aluminum wire
Advantages: as envelope alternatives of pure enameled copper wire, it has good performance of high frequency transmission, originally it was applied in various types of high-frequency electromagnetic induction coil; now in order to save more production cost, ECCA wire has been widely used in various types of electronic coils, transformers, inductors, rectifiers, and all kinds of large and small motors, and has excellent soldering performance. Its density is low, the weight of the unit product can at least save 40% of the copper wire, it can save a lot of cost of production material. Disadvantages: the tensile strength is about 50% of pure copper wire, Ecca wire will break more frequently than copper wire.
C  Enameled aluminium wire
 
Advantages: due to much lower density than copper clad aluminum wire, weight per unit product can save at least 60% than the copper wire. Using aluminium wire will save much more cost of production materials.
 
Disadvantages: tensile strength is about 30%-40% of the copper wire, the conductor is easy to stretch during production; 
The surface of the aluminum conductor is not easy to direct solder, special treatment of welding joints is required.




   Enameled wire
 General introduction
 
Enameled wire is mainly composed of conductor and insulation layer. The main production process includes annealing the conductor and enameling several time on the surface to get relatively thin insulation but high break-down voltage. In recent years, with the rapid development of electrical and electronic products, enameled wire has been applied to various fields of production and life, such as various types of motors, transformers, rectifiers, voice coil, electromagnetic inductance coil.

 Classification of enamel wire

 Classification by conductor
A  enameled copper wire
 
Advantages: as the most traditional type of enameled wire, the application field is wide, soldering convenient, performance stable.
Disadvantages: high cost of production.
 
B Enameled copper clad aluminum wire
Advantages: as envelope alternatives of pure enameled copper wire, it has good performance of high frequency transmission, originally it was applied in various types of high-frequency electromagnetic induction coil; now in order to save more production cost, ECCA wire has been widely used in various types of electronic coils, transformers, inductors, rectifiers, and all kinds of large and small motors, and has excellent soldering performance. Its density is low, the weight of the unit product can at least save 40% of the copper wire, it can save a lot of cost of production material. Disadvantages: the tensile strength is about 50% of pure copper wire, Ecca wire will break more frequently than copper wire.
C  Enameled aluminium wire
 
Advantages: due to much lower density than copper clad aluminum wire, weight per unit product can save at least 60% than the copper wire. Using aluminium wire will save much more cost of production materials.
 
Disadvantages: tensile strength is about 30%-40% of the copper wire, the conductor is easy to stretch during production; 
The surface of the aluminum conductor is not easy to direct solder, special treatment of welding joints is required.




 

LED Bicycle Light is also call LED Bike Light. Some Bike Lights can also be used as a Flashlight after taking off from the bicycle to meet your different demands! So it is actually a multiple Lights! Aluminum Casing provide strong and durable material for long lasting. Bright and Quality LED bulb to light up your night vision in the dark. It's a great Bike Torches to make you enjoy your sports!

The LED bulb are not only brighter than normal bulb, but also is environment protection because the LED lifetime is more than 100,000 hours.

We have two different kinds of Bicycle Lights according to the battery: Non-rechargeable and Rechargeable Bike Light! So we can meet the demands for various customers. The rechargeable batteries and non rechargeable batteries are all under our strict control and inspection when from battery supplier. We'll double test them to insure they are all working well and lasts long enough time.

For our Bike Lamp, we control our quality strictly from buying new raw material, processing, machining, anodize finish to final inspection etc. The raw material we used are all aerospace grade Aluminum and new plastic material with strong hardness! We have more than 105 Precise machining machines for processing. Our anodizing finish will assure enough time to keep it meet our quality.

Our company have two inspections : once in the production and the other is after assembling to ensure higher quality.

Highest quality but lower price!

LED Bike Light

LED Bike Lights, LED Bicycle Light, LED Bike Lamp, LED Lights for Bikes

NINGBO BETTERLITE TECHNOLOGY CO.,LTD. , http://www.flashlightsuppliers.com