Unstoppable, this product meets your full technical pursuit of QC fast charge charger!
Hello everyone, I'm iambillbil. In this era, fast-charging mobile phones are popular, and products using QC's fast charging protocol are numerous. Oreco brand, in the charging accessories in this area, launched a variety of products. Among them is the dual-port, fast-charging charger, which is priced at $128 in a foldable design.
The main technical content of the product is to support the QC2.0 charging protocol. This product promotes the above output modes supporting 5V, 9V and 12V voltages.
Accessories more conventional, manuals, warranty cards, certificates of compliance and so on.
The square design, full plastic shell, with brand LOGO,
Matchbox size, collapsible and portable design. Bottom with product performance labeling. Both USB ports support 5V 2A, 9V 2A and 12V 1.5A. Single 18 W, dual 36 W design.
Folding design plug design,
In addition to the charger, the Oerlikon brand also has a signature charging cord, an M-usb charging cord designed for this braided cord.
The product supports dual USB output, support Android conventional, Apple fast charge, and QC2.0 fast charge multiple modes, dual-port independent. Recognition ability, output ability can all meet the requirement.
Below 5V output, no load 5.12V
At 5V, the single port limit output capability is 5.23V and 2.6A. Here we can see that the 5V output mode is equipped with intelligent line compensation, and the voltage can be increased intelligently as the output energy is increased. And also with the main safety over-current protection, once the output exceeds the set current, it will instantly reduce to 0A, (to ensure charging safety, to avoid short-circuit conduction)
ORICO dual-port QC2.0 charger 5V output mode, Apple's mobile phone 5V 2.4A fast charging protocol and ordinary Android phone DCP 5V 1.5A high current protocol two.
With a mobile phone that uses the 5V mode for charging, such as an Apple mobile phone, such as an Apple tablet, it will intelligently recognize that the product uses the APPLE 5V 2.4A charging protocol, intelligently identifies the mobile phone chip, intelligently determines the output current, and intelligently realizes fast charging. Recognition can ensure safety, safety can also be fast, and practicality is king.
With a 5V mobile phone that does not support high-current charging, BC 1.2A charging mode can also be recognized for safe charging.
Then look at the product's 9V output, no-load voltage of 9.02V, at the moment the output protocol is QC2.0 HDCP 9V mode.
ORICO dual QC2.0 charger 9V output mode, the limit output is 9.13V, 2.3A mode, can still be seen here, 9V output mode with intelligent line compensation, with the increase of output energy, the voltage can also be intelligently improved . And also with the main safety over-current protection, once the output exceeds the set current, it will instantly reduce to 0A, (to ensure charging safety, to avoid short-circuit conduction)
Under the 9V fast charge mode, the charging effect of the fast charge mobile phone can correctly identify the QC 9V mode and perform charging.
With the charging treasure that supports fast charging design, it can also complete recognition and fast charging, guaranteeing a mobile power of 10,000 capacity in about 3 hours. Compared to conventional chargers, the slow charging mode requires 8 hours faster.
Next, look at the 12V output mode of the ORICO dual-port QC2.0 charger. The no-load voltage is 12.02V. At this moment, the output protocol is QC2.0 HDCP 12V mode.
ORICO dual QC2.0 charger 9V output mode, the limit output is 11.52V, 1.9A mode, here you can see, no line compensation design in 12V output mode.
Still with the over-current protection of the main safety, once the output exceeds the set current, it will instantly reduce to 0A, (to ensure the safety of charging, to avoid short-circuit conduction)
For 12V charging products, with the use of 12v charging mode music as the 1S mobile phone, or can be used with 3 hours full of Huawei glory fast charge charging treasure, can achieve 12V charging effect in QC2.0 mode.
It is a necessary condition for demonstrating the performance of charging products. I hope you will like it.
Thank you for reading iambillbil's brief introduction to the ORICO dual port QC2.0 charger. thank you all.
Comments:
The product's multiple recognition mode is real and reliable. It also supports automatic identification of multiple voltages such as 12V, 9V, 5V, etc. The output power is also much stronger than the common single port fast charging. It supports intelligent line compensation, supports overcurrent protection, and can achieve synchronous rectification. The changes in the protection voltage to stabilize the current output, the actual output limit capability is also 1.33 times more than the official publicity performance, to meet all the technical elements needed to select a QC charger.
This is a fast charging charger with a very strong technical performance, not considering the price point. (If you consider the price, the goods can be purchased for two 39.99 yuan at the same time, can achieve 18 watts, single port, with line repair, with Stream cut-off, QC fast charger, much more expensive) Still hope you will like,
Rf Hybrid Coupler,90 Hybrid Coupler,90 Degree Hybrid Coupler,20Db Directional Coupler
Chengdu Zysen Technology Co., Ltd. , https://www.zysenmw.com