[Global Network Technology Reporter Chen Jian] Recently, Huawei P10 first fell into the "screen door" and then fell into the "flash memory gate." After the official response to the "memory door", Yu Chengdong responded today on Weibo, for this Two issues discussed their own views, saying that "a large number of proprietors vilify us."
Huawei P10 has been favored by many consumers since its release. But soon after, it was revealed that there was no oleophobic layer, and soon afterwards, Huawei P10 exploded the “flash memory gateâ€. P10 was suspected to adopt emmc5.1, ufs2.0, and ufs2. 1 Three kinds of different specifications of memory, resulting in a large difference in memory read and write speed, and the use of the emmc5.1 specifications memory read and write speed slower than ufs2.0.
Yu Chengdong gave this explanation. He explained that Huawei's P10 lacks oleophobic layer because of the conflict with gorilla glass. In order to solve the problem of cell phone drop screen glass vulnerable to damage, Huawei P10 series is the first to use the leading Corning fifth-generation glass in the world, reducing the probability of drop damage. 80%, however, after the glass is coated with an oleophobic layer, it rubs strongly on the screen of the mobile phone. The most advanced incell technology displays static patterns on the screen (after a while, it will automatically disappear) and the industry cannot find a solution.
Yu Chengdong said that Huawei had considered repurposing Corning’s old generation of glass, but it is obviously an injury to consumers’ interests. After all, the oleophobic layer on the surface of mobile phone glass will be worn out for a period of time. Far above the oleophobic layer.
Therefore, Huawei covered the oleophobic layer on the cell phone's protective film. Later, we found a new anti-static oleophobic layer technology. The new P10 cell phone has added a new technology oleophobic layer. For a small number of previously sold P10 mobile phones without an oleophobic layer, a solution for daubing the oleophobic layer is available at Huawei's experience store, and consumers can apply it.
For different memory problems, Yu Chengdong also admitted that the P10 series of mobile phone flash memory uses both UFS and EMMC solutions. The reason is that Huawei has also experienced the current problem of memory shortage. However, Huawei's joint optimized design of hardware and software has ensured that even if EMMC storage is used, it still maintains a good practical experience.
Finally, Yu Chengdong also advertised Huawei's P10 photos. And referred to as "Huawei will not go through the inferior things of cutting corners and materials," and urges manufacturers not to engage in bad faith.
Yu Chengdong thinks that Huawei’s P10 has been criticized so much because “a few friends have seen the global sales of Huawei’s P10 mobile phones are very hot, and they have tainted us and misled consumersâ€.
For this explanation, consumers can not understand it? Why did Huawei not explain when P10 was released and when it was sold, but only after the problem occurred? Do you convince yourself of this explanation?
The following is the full text of Yu Chengdong’s microblog response.
