The large ring represents the general size of a standard electrostatic earphone drive unit, and the small ring represents the general size of the KSE1500 drive unit, which is only 1/8 to 1/11 of the standard electrostatic earphone drive unit.
Electrostatic technology has been used for a long time, but the products are mainly large diaphragm floor-standing speakers or full-size on-ear headphones, most of which have no effect of isolating ambient noise.
The amplifiers of these systems usually need to be connected to an AC power source (wall) and are not suitable for mobile use.
The KSE1500 is portable, lightweight, and soundproof, and its features will maximize its utility in today's digital world, such as DACs and high-quality DSPs.
Unparalleled audio clarity and precise detail, with the fastest and most accurate transient response on the market
The main advantage of an electrostatic drive unit is that it has almost no weight diaphragm. It can be said that there may be no scale in the world that is sensitive enough to weigh the weight of the KSE1500 diaphragm. Mathematically, the diaphragm weight is about 0.0002 grams, while the one dollar bill has a weight of 1 gram, which is 5000 times that of the diaphragm. Therefore, it moves much faster than the diaphragm in a conventional moving coil or a balanced armature drive unit.
Imagine what it feels like to quickly shake the bowling in your hand.
Then think about how simple it is to shake the table tennis. The lighter the weight, the faster the shaking.
Similarly, an electrostatic diaphragm with almost no weight vibrates very quickly, and a single such diaphragm reproduces the sound quality of the original audio with unparalleled precision.
The Through-Wall Terminal Block adopts screw connection wire technology, the insulation material is PA66, and the connector adopts high-quality high conductivity metal material.Through wall type Terminal Blocks can be installed side by side on the panel with thickness of 1mm to 10 mm, which can automatically compensate and adjust the distance of panel thickness to form a terminal strip with any number of poles, and can be used to increase air gap and creepage distance. Without any tools, the through wall terminal block can be firmly installed in the rectangular reserved hole on the panel, which is extremely convenient for installation.
Through-wall terminal block, structure design feature is easy connection and high contact strengths. These connectors are available in all types of wires with the size from 0.5mm2to 95mm2, and designed in accordance with IEC60947,UL1059,UL486E and CSAC22.2No.158.
Small Terminal Block,Power Terminal Block,Terminal Strip Connector,Terminal Block Connector Types
Suzhou WeBest Electronics Technology Co.Ltd , https://www.webestet.com