First Yingxi Power Generation after Yingxiu Tatsu Power Station Earthquake

“Yao Xiu Ying Xiu Wan, Chengdu Liang Half”, there is a saying in Wenchuan Yingxiu to describe Sichuan Yingxiu Bay Water Power Generating Plant (hereinafter referred to as Yingdian General Factory). At 11 am on the 24th, Wenchuan Power Station Unit 3 was repaired and successfully connected to the grid for power generation. This is the first unit connected to the grid after the "May 12" Wenchuan earthquake. It was also the first unit of the Yingdian Power Plant that succeeded in grid-connected power generation after the “8·13” catastrophic debris flow disaster last year.

Yingxiu Power Plant is located in Wenchuan County, 36 kilometers away from Dujiangyan City. It has jurisdiction over 3 Yingxiuwan, Yuzixi and Yuda hydropower stations. It has a total of 11 units with a total installed capacity of 455,000 kilowatts and an average annual generating capacity of more than 2 billion kwh. In the 1970s, the power plant was one of the most important power sources in Chengdu.

The “5.12” mega earthquake that occurred in 2008 has brought disaster to the power plant. After the earthquake, it was fully repaired. By August last year, a total of 5 units of the Yingxiuwan and Yuzixi Power Stations began to generate electricity. On August 13, Yingxiu suddenly fell heavy rain, millions of mudslides poured into the Lancang River, resulting in blocking of the river and diversion of the Minjiang River. Surging floodwaters were pumped from the tailwaters and traffic tunnels of Yingxiuwan, Yuzixi and Tingda power stations, respectively, and the three-station plant was flooded.

After October 20 last year, electrical workers again entered silt-laden factories and repaired them. After nearly 180 days of repair work, the 40000-kV Unit 3 of the Tatda Power Station succeeded in grid-connected power generation yesterday.

According to Tian Ronghai, deputy chief engineer of Yingdang Electric Power Plant, it is expected that at the end of the year, the 6 units of Yingduo Power Plant will complete repairs and power generation on the grid.

Barbecue machine is a barbecue food machinery and equipment, its main function is to do all kinds of barbecue products. Mainly used for barbecue shops, mobile barbecue and so on.
The use of rotary grill grill grilled after a piece of barbecue from the barbecue, accompanied by salad dishes, ingredients into a special made in the bread. Visibility, on-site production, and popular in Europe and the United States. Become one of the mainstream street food fast food.
1 power: the range of 800-1600W, according to the actual situation. 2 grilled food: steak, shrimp, vegetables, ham and so on. 3 functions: 3.1 baking pan with a raised stripes, relying on the protruding stripes to bake the food, there will be drainage structure, slope or drain hole. 3.2 baking time is about 3-5 minutes. 3.3 thermostat is adjustable, according to the different food or personal taste to adjust the different. 3.4 heat pipe: According to the different grades of products, choose different specifications of the heating pipe. Generally fixed in the back of the heating plate, using high temperature stainless steel tube or nickel-chromium alloy tube INCO840, the latter cost higher. 3.5 generally do not need PCB control, FireWire to increase the temperature insurance. 3.6 within the wiring: the general use of hidden lines, hidden in the activities of the hinge of the shaft. 3.7 Other: need to take oil device, a separate configuration or drawer type oil box. 3.8 turn on the power, the red power light, the machine warm, until the green light into the food, wait 3 to 5 minutes.


Electric BBQ Grill

Electric BBQ Grill,Smokeless BBQ Grill,Electric Chicken Grill,Vertical Electric BBQ Grill

Ningbo APG Machine(appliance)Co.,Ltd , http://www.apgelectrical.com

Posted on