1. Nowadays, the newer TVs all have their own WIFI function, especially now that smart TVs can directly connect wireless routers. You can even share wireless pictures with your tablet notebook phone.
2. If the TV is connected to a wireless network, the first thing that is necessary is that the speed of the wireless network must be fast, and the telecommunications 2M network will not work. The picture will be paused.
3, the router must be set to be connected without dialing. Because the general TV does not have any dialing function.
4, for telecommunications network TV, then the general telecommunications over the installation is recommended that you install the cable, because to tell the truth to see network TV, home network speed must be faster. Wireless, telecommunications will be afraid because of signal blocking, affecting normal viewing.
For telecom network TV set-top boxes, you must match the wireless network card must be equipped with a dedicated wireless network card, he has a fixed model. If you buy it casually, you may not recognize the set-top box. Some of the telecommunications bureau purchases, of course, you can also buy their own, mainly you want to know which model, specifically Baidu.
5, network television wireless telecommunications generally let you use his special wireless network card to connect Telecom's wireless cat connection. Wireless cats have wireless dialing capabilities.
6, network television wireless telecommunications generally let you use his special wireless network card to connect Telecom's wireless cat connection. Wireless cats have wireless dialing capabilities.
7. Next choose wireless connection
8. Then search your own network for the next step. If you are using a wireless cat, search for your own wireless cat. If you are using wireless routing, it will be different, searching for your own wireless route.
Serious ways and encryption methods have to be set up, wireless routers must be set up in advance, and wireless routers should be set to not dial-up connections.
9, the next step, if it is PPOE, then select PPOE, fill in the telecommunications to your user name and password. Do not restart the next step can be used.
If it is a wireless router, select DHCP, do not fill in the user name and password, select no authentication, and then fill in your telecommunications user name and password in the next step, and then restart it. If it doesn't work, you will call your username +@vod in this step. The password is your password and you can restart it.
KNLE2-63 TWO FUNCTION : MCB AND RCCB FUNCTIONS
leakage breaker is suitable for the leakage protection of the line of AC 50/60Hz, rated voltage single phase 240V, rated current up to 63A. When there is human electricity shock or if the leakage current of the line exceeds the prescribed value, it will automatically cut off the power within 0.1s to protect human safety and prevent the accident due to the current leakage.
leakage breaker can protect against overload and short-circuit. It can be used to protect the line from being overloaded and short-circuited as wellas infrequent changeover of the line in normal situation. It complies with standard of IEC/EN61009-1 and GB16917.1.
KNLE2-63 Residual Current Circuit Breaker With Over Load Protection
KNLE2-63 Residual Current Circuit Breaker,Residual Current Circuit Breaker with Over Load Protection 1p,Residual Current Circuit Breaker with Over Load Protection 2p
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.korlenelectric.com