The CS35L00 is a 2.7 W high efficiency Hybrid Class-D audio amplifier with low idle current consumpTIon and a selectable gain.
The CS35L00 features an advanced closed-loop architecture to provide 0.02% THD + N at 1 W and -75 dB PSRR at 217 Hz.
A flexible Hybrid Class-D output stage offers four modes of operaTIon: Standard Class-D (SD) mode offers full audio bandwidth and high audio performance; Hybrid Class-D (HD) mode offers a substanTIal reducTIon in idle power consumption with an integrated Class-H controller; Reduced Frequency Class-D (FSD) mode reduces the output switching frequency, producing lower electromagnetic interference (EMI); and Reduced Frequency Hybrid Class-D (FHD) mode produces both the lower idle power consumption of HD mode and the reduced EMI benefits of FSD mode.
Requiring minimal external components and PCB space, the CS35L00 is available in a 3.0 mm x 3.0 mm, 10-pin DFN package in Commercial grade (-10 ℃ to + 70 ℃).
CS35L00 main features:
Filterless Hybrid Class-D Architecture
– <1 mA Quiescent Current
– 1 x 2.7 W into 4 ohm (10% THD + N)
– 1 x 2.1 W into 4ohm (1% THD + N)
– 1 x 1.6 W into 8 ohm (10% THD + N)
– 1 x 1.3 W into 8 ohm (1% THD + N)
ï€
Advanced Delta-Sigma Closed-loop Modulation
– 98 dB Signal-to-Noise Ratio (A-Weighted)
– 0.02% THD + N @ 1 W (SD & HD Mode) ï´
Integrated Protection and Automatic Recovery for Output Short-circuit and Thermal Overload
Pin-compatible 9-ball WLCSP family for easy upgrade path
– CS35L01: +6 dB default Gain
CS35L03: +12 dB default Gain
Pop and Click Suppression
CS35L00 main applications:
Mobile Phones
Laptops / Netbooks
Portable Navigation Devices
Active Speakers
Portable Gaming
figure 1. CS35L00 block diagram
figure 2. CS35L00 SD and FSD mode typical connection block diagram
image 3. CS35L00 HD and FHD mode typical connection block diagram
Note: 3. The value of the capacitance connected to the LFILT + net should not exceed 4.7uF. Presence of a capacitance above 4.7uF will prevent proper HD and FHD operation.
2.7 W x 4 CS35L00 Amplifier Demo Board
The CDB35L00-X4 demonstrates the CS35L00 high-efficiency Hybrid Class-D audio amplifier. This demonstration board implements a four-channel, quad amplifier system that delivers 2.7 W per full-bridge channel into 4-ohm loads using a single +5 V supply .Differential audio inputs can easily be connected through the J10, J20, J30, and J40 headers. If desired, the gain can be adjusted through the optional input resistors. Component landings are available for an optional EMI output filter.
The CDB35L00-X4 can be configured to evaluate the four operational modes and two gain settings of the CS35L00 amplifier. Mode, Gain, and Shutdown control is available through the S1 switch. Hybrid control is vailable through the R13, R23, R33, and R43 resistors.
Figure 4. 2.7 W x 4 CS35L00 amplifier demo board outline drawing
Main features:
Contains 4 CS35L00 Hybrid Class-D Amplifiers
Selectable +6 dB or +12 dB Gain
Selectable Operational Modes
Device Shutdown Control
Delivers 2.7 W / Ch into 4ohm at 10% THD + N
Delivers 1.6 W / Ch into 8 ohm at 10% THD + N
Differential Mono Analog Inputs for each CS35L00 Amplifier
Demonstrates Recommended 4-Layer Layout and Grounding Arrangements
– Optional Output Filter Connections
– Optional Gain Adjustment Resistors
Powered by Single + 2.5-5.5 V Power Supply
Figure 5. Block Diagram of CDB35L00-X4 Amplifier Demo Board
Image 6. CDB35L00-X4 amplifier demo board circuit diagram
CDB35L00-X4 Amplifier Demo Board Bill of Materials (BOM):
Do you know what is ENEPIG in PCB?
What is ENEPIG?ENEPIG-Electroless Nickel Electroless Palladium Immersion Gold is a surface finish for Printed Circuit Boards.ENEPIG works well with lead free and conventional eutectic solder alloys.This is the best way for gold wire bonding. Advantages for ENEPIG:
1.[Black Nickel" free – no possibility of grain boundary corrosion of nickel surface by immersion gold
2.Palladium acts as an additional barrier layer to further reduce copper diffusion to surface, thus ensuring good solderability
3.Palladium completely dissolves into solder, without leaving an excessively high P% rich interface, exposing an oxide-free nickel surface allowing reliable formation of Ni/Sn intermetallic
5.Withstands multiple lead-free reflow soldering cycles
6.Demonstrates excellent gold wire bondability
7.Process costs substantially lower than electrolytic nickel gold or electroless nickel electroless gold
ENEPIG PCB,Aluminum PCB,Rigid PCB,Flexible PCB
Storm Circuit Technology Ltd , https://www.stormpcb.com