I couldn't help but laugh when I read the report of Mr. Daniel Mikat of Toyota in the June meeting of IWC. However, the chapter that China's electric vehicles enter wireless charging has to rely on ZTE's leadership, and can't laugh.
As shown in the figure below, the hardware part of the wireless charging is mainly on the car and under the car. The car is laid by the operator/service provider, and the car is laid by our car engineers.
In order to run this system safely and orderly, the basic coordination work needs to be coordinated between the wireless charging pile and the vehicle. According to Toyota, this piece needs to have a minimum interoperability requirement.
1) Communication (SAE J2847/6, ISO/IEC 15118-7)
SAE is generally a private standards body led by American and Japanese car manufacturers, and there is a dispute with the ISO/IEC European car factory. Fortunately, SAE is generally faster. There are many people voting in ISO/IEC. It is slower and has something to talk about.
2) EMC/EMI requirements (Incl. FCC Part 18)
In the FCC standard, the non-ISM band, 15 & TImes; SQRT (power/500) is defined, and the initial test water of 3.3 KW is ok. The latter 6.6 or even larger is yet to be defined.
3) Radiation exposure (ICNRP2010) and medical device exposure limits
The magnetic field of wireless charging will still come out. Here, I still need to do more homework to see how it reacts to the human body after the big one. I am very curious to come to play a bus bus, when charging, is it necessary for everyone to get off or run a few tens of meters.
4) Improve the performance of charging
– single frequency (85kHz)
– define minimum efficiency
– Define the alignment accuracy (X, Y, Z), especially the Z direction directly determines the efficiency
– The depot defines the largest installation size
– Define the parking space installation location
– Anti-interference ability (TPMS, PEPS, FOB)
Walking in front is hard work, Toyota is quite powerful.
Summary :
1) GB has been established, how to play this stuff?
2) After conducting the standard of conduction, is it going to continue to close the door? I think if this wireless charging really does, the problem of security risks and utilization is not small.
3) Due to the communication industry, after our domestic propaganda, it is too myth to refer to the standard as a standard. You can do it, but you can use it, at least send more engineers, and prepare some funds to do some Experiment, it is appropriate to speak according to the data
Mulitiway Boxed Power Supply with PFC function .
4channels /9 channels / 18 channels metal boxed power supply with 12V and 24V output . can put 7AH battery inside .
CCTV power supply Unit(-High quality project series)DC12V 5A,4 Channel, PTC protection for each channel
Can customized output and LOGO .
Features
1. Universal AC input/Full range: 96-264V AC,47-63Hz;
2. Output voltage:DC12V;
3. Output current:5A/10A/16A/20A/30A;
4. Output Channels:4CH/9CH/18CH;
5. Voltage and current of each channel distributing evenly;
6. Output Voltage adjustable: DC 11-15V.
PROTECTION FUNCTIONS
1. Built-in PFC(Power factor correction)circuits
2. Individual PTC fuse for each output channel.
3. Built-in EMI filter,100% full load burn-in test.
4. Short circuits protection
5. Over current protection
6. Over voltage protection
7. Low output ripple and noise
Certification and Warranty
1.. CE& FCC & EMC & LVD & ROHS
2. Warranty:3 years
Product application:
1. Stepping motor
2. PLC control System
3. Surveilance cameras
4. LED advertisement
5. Lamps and lanterns
6. CP communication
7. Communication equipment
8. Industrial control
9. Home Application
10. The traffic and Building
Metal Boxed Multi-way Boxed Power Supply
4 channels metal boxed power supply ; Metal box cctv power supply ; 12v power supply
Guangdong Steady Technology Co.LTD , https://www.steadysmps.com