Epistar Lab has successfully developed a number of technologies, including a new generation of transparent substrate conversion processes, fine structures that increase photon extraction rates, and improved current distribution uniformity, enabling red LEDs at wavelengths. The efficiency is 174 lm/W at 610 nm. At the same time, in the case of high-voltage blue LEDs, when combined with a combination of conventional wavelength conversion materials, it can be verified that the warm white light with an excellent temperature of about 2800K has an efficiency of 170 lm/W and a color rendering of 88. The above results were achieved today, not only exceeding the target, but also continuing to lead the industry.
Jingyuan Optoelectronics will continue to develop more advanced technologies to enhance the performance of its products, and work with midstream and downstream customers to promote LED light sources to the lighting market.
We provide quick-turn injection molding by many types of materials, like ABS, PA66, PBT, TPU, TPE, PVC, PE, NYLON 6, PC, silicone, TPE, EPDM, PUR, etc. Special for some plastic parts. Our advantages in internal prototyping, bridge tooling and short-run manufacturing, which can eliminate the costly and time-consuming for customers a lot.
After customer approved 3D drawing, we can test it by 3D printer first, then move on for formal tooling once confirmed ok. And all related materials, logo, color or finishes can be chosed as customers' requirement.
Injection Molding Parts,Plastic Injection Molding,Low Cost Plastic Injection Molding,Plastic Mold Injection Molding
ETOP WIREHARNESS LIMITED , http://www.etopwireharness.com