It is reported that the new generation of iPod Touch may expand its storage capacity, adopt capacitive touch Home key, and support 3G network, allowing users to enjoy all new services launched by Apple.
Apple introduced iCloud cloud computing service at the Global Developer Conference in June this year. Users can back up and synchronize data on Apple's remote server. In addition, Apple also released iMessage instant messaging software, users can use WiFi or 3G network to achieve communication.
Previously, Apple has been delineating the boundaries between the iPod Touch and the iPhone, not only canceled the iPod Touch GPS chip, but also reduced the camera and display specifications. However, contrary to expectations, after Apple added new components such as sensors and cameras for the iPod Touch, the new iPod Touch added 3G networks. The development of the iPod Touch is gradually being cast on the iPhone.
In addition, news predicts that the new iPod Nano will likely be equipped with a camera.
Rubber keypad Membrane Switches = Rubber Keypad + Membrane Switch
> Why need Rubber Keypad Switches?
As we know the common membrane switch is usually use PET and PC film as the graphic overlay. The product can be very thin, usually less than 1mm.
But sometimes many customers design their product to be rubber keypad switches. Because of that rubber can give users a very good touch feeling.
In addition, rubber keypads can make carbon pills on the backside of the buttons, the carbon pills are conductive, then it can be combined with PCB circuit
very easily. We only need make the gold plated conductive pads on the PCB, then assemble the rubber keypad with PCB, when you press the buttons, the
carbon pills will connected to the gold pads, then trigger function.
The rubber keypad switches also can achieve the backlighting easily. As we know the rubber raw material usually is translucent. It is light through. After painted we wanted colors on the rubber, we only need laser etch the backlit symbols and letters, then the LED light from the backside of PCB or membrane circuit can be through the etched area out to get the backlit effect.
Rubber is easy to clean, so once the keypad is contaminated you can clean it very easily. Rubber keypad's press life also is very high. At least 1,000,000 times above. It is very durable and not easy damaged. So the rubber keypad switches are widely used in machinery, industrial manufacturing, vending machine, dirty and oil contamination environment and others.
Rubber Keypad Switches
Rubber Keypad Switches,Backlight Rubber Keypad,Silicone Rubber Keyboard Switches,Tactile Rubber Membrane Switch
Dongguan LuPhi Electronics Technology Co., Ltd. , http://www.luphiprint.com