SYL-17 hollow glass dew point meter use method - Database & Sql Blog Articles

MOS power IC full range

Probe KG-250G switch needle head diameter is 3.0 spring exposed switch needle

Photocoupler

SYL-17

Insulating Glass Dew Point Meter

One,

SYL-17

Insulating Glass Dew Point Meter

In accordance with

GB/T11944-2002

"Insulating Glass Standard" method for testing dew point

The system is made of electronic refrigeration and digital display temperature, which has the advantages of simple operation and intuitive display.

This device is designed to measure the dew point of insulating glass accurately according to national standards. It ensures that the insulation performance of the glass is evaluated properly. The digital display makes it easy for users to monitor the test process in real time.

Two,

SYL-17

Insulating Glass Dew Point Meter

Instructions

※

Must be used before use

Must be opened

Ring the water to ensure that there is circulating water in the pipeline, and all the cables can be plugged in before powering on. After the equipment is tested, first turn off the power and then turn off the circulating water. Please follow the instructions, otherwise the customer will be responsible for the consequences of improper operation.

l

Connect the temperature sensor and the voltage regulator plug to the corresponding plug of the hole dew point display.

The main power plug is inserted into the corresponding jack, the power switch is turned on, and the indicator light is on.

often.

2

Press

"

Water supply

”

Button, system works, automatically adjusts the temperature according to the set temperature

(-62

°C

)

.

3

When the temperature reaches the standard required temperature, please press the timer

"RST"

Key, the system automatically starts timing according to the set time. After the time arrives, the alarm buzzer alarms and works.

The indicator light is off.

4

After the test is completed, the system is powered off first, then the external circulating water is turned off.