Lumex has announced the worldwide launch of SunBrite agricultural LED light bars that promote optimal plant growth. This light bar can provide two wavelengths of red and blue for different plant types and growth cycles, which is better and more cost-effective than high intensity discharge (HID) and other LED technologies.
The new agricultural LED light bar has key performance enhancement technology, which can save up to 80% of the cost compared with high intensity gas discharge (HID) technology and up to 20% of the cost than other LED technologies. SunBrite's new agricultural LED light bar has excellent light absorption capacity, longer life, convenient use and simple installation.
Compared with some HID technologies, this new technology can improve the light absorption efficiency by more than 93%, saving 50% of space and 80% of costs. SunBrite agricultural LED light bar adopts high-efficiency design. Compared with other agricultural LED technology, the volume of the light bar can be reduced by more than 20%, and the cost efficiency can be increased by more than 20%.
Compared with HID technologies such as metal halide and high pressure sodium lamp (HPS) solutions, LED light bars have key performance advantages in terms of efficiency and ease of use, and can be widely used in various agricultural fields, including: horticulture, greenhouses, gardens, planting And sowing.
higher efficiency
In terms of light absorption, energy consumption and space allocation, SunBrite agricultural LED strips use components that can greatly improve efficiency.
Academic studies have shown that when plants are exposed to red light sources (640-660 nm) and blue light sources (450 nm), chlorophyll absorbs light best. SunBrite agricultural LED strips provide full spectral composition control, ensuring that the emitted light wave is almost 100% optimally adjusted to match the absorption wavelength of chlorophyll. In contrast, only 7% of the light generated by HPS technology is absorbed by plants. Compared with HPS technology, the light absorption efficiency of LEDs can be increased by more than 93%, so it can significantly reduce the use of fertilizers and other plant nutrients, which can greatly save costs and minimize the use of chemicals.
This LED light bar can significantly reduce energy consumption, which can reduce energy consumption by up to 80% compared to some HID technologies.
Due to the reduced heat release and compact design, SunBrite agricultural LED strips can also save space. Unlike HPS technology, this LED strip does not require a ballast and can reduce the amount of heat released by up to 75%, thus eliminating the need for space-consuming heat dissipation systems and vents, reducing the required space by up to 50%.
Gear Reducer Motor is a small precision reducer, and the size and specification can be customized below 38mm. Shenzhen shun cheong electrical co., LTD. 15 years engaged in the design, development, manufacture Dc Gear Motor, products applicable to the smart home, widely used in intelligent robot voice interaction, children's education escort robot, intelligent sweeping machine robot, intelligent robot adaptability, independent motor, intelligent medical robot project.
Application field:
Method of use: the best stable in horizontal plane, installed on the Gear Reducer Motor output shaft parts, cannot use a hammer to knock,knock prone to press into the gear Reducer Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Gear reducer motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Gear reducer motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of gear reducer motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Gear Reducer Motor
Gear Reducer Motor,Reducer Motor,Gear Reducer Stepper Motor,Dc Reducer Gear Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com